12V24V36V48V60V72V lead-acid battery power indicator Lithium battery power voltmeter LCD color screen

Specification:

Product size: 61.5mm x 33.5mm x 13.5mm

Installation size: 58.5mm x 28.5mm

Display size: 36mm x 19.5mm

Working voltage: 10V-100V

Power waste: 5-6mA (LED ON)

Voltage accuracy: ±0.1(Typical),±0.5(Max)

Sleep power: 6-12uA (20V)

Working  temprature : -10~55℃

Instruction:

1. PH2.0 terminal products supporting the use of wire, connected to the circuit board face should plug back.
2. External NTC temperature sensor, please put the sensor to measure the temperature of the parts, do not

squeeze the sensor( selective assembly).

3. Red line to the positive terminal, black line to the negative terminal.
4. After the instrument is powered on , which shows the percentage of the battery power, the voltage value,

and the symbols of the analog battery.

5. Press the button to turn off the instrument. In close mode, you can wake up the instrument by pressing

any button.

6. Click the button , you can switch the voltage value and temperature value display.
7. The battery symbols on the display interface, from the right to the left, are 7 display boxes representing the

pool power from low to high.

8. The voltage on the display interface is measured in real time, and the voltage value is displayed on

10-100V.

9. The percentage on the display interface is the percentage of the remaining battery power
10. When the battery is connected to the charger or the discharge of the high current load, the display

parameters will fluctuate

11. The red lightning flashes the alarm when the battery is low
12. If the battery specification is special, you can enter the set mode 3– and reset the upper and lower limits of

the measured battery voltage.
Package included:

1 x Battery Capacity Indicator Voltage Monitor